TEKTRONIX TDS 220 REPAIR and TEKTRONIX TDS 220 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the TEKTRONIX TDS 220. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the TEKTRONIX TDS 220 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope?
Shop for Comparable Products on our  used Oscilloscope page

 
   TEKTRONIX TDS 220 (TDS220)   Description / Specification:    
TEKTRONIX TDS 220 2 Ch 100 MHz Digital Storage Oscilloscope

100 MHz Digital Storage Oscilloscope. Total Channels: 2. Sample Rate: 1 GS/s on each channel. Sensitivity (with calibrated fine adjustment): 2 mV to 5 V/div (bandwidth limited to 20 MHz at 2 mV/div and 5 mV/div, in all modes, and 20 MHz at 10 mV/div in Peak Detect mode). DC Gain Accuracy: ± 3%. (± 4% at 2 mV/div and 5 mV/div). Vertical Resolution: 8 bits (256 levels over 10.24 vertical divisions). Acquisition Modes: Sample, Average, Peak Detect; High frequency and random glitch capture; captures glitches as narrow as 10 ns using acquisition hardware at all time/div settings between 5 us/div and 5 s/div. Time/Division Range: 5 ns to 5 s/div. Record Length: 2500 sample points per channel. Horizontal Accuracy: ± 0.01 %. Waveform Storage: Two 2500 point reference waveforms. Trigger Type: Edge (Rising or Falling), Video, Set to 50%. Trigger Source: CHI, CH2, Ext, Ext/5 and AC Line. Cursor Types: Voltage, Time. Backlit LCD with adjustable multilevel contrast. GPIB



 

Standard Calibration $160.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the TEKTRONIX TDS 220. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Load Regulation
Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

Power Linearity
When changing the power level and measuring the differences (in dB) between actual and displayed power levels, the power linearity is ± half the span (in dB) between the maximum and the minimum value of all differences.

Settling Time
Settling time of an output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band, usually symmetrical about the final value.

Please contact us for your TEKTRONIX TDS 220 REPAIR and/or TEKTRONIX TDS 220 2 Ch 100 MHz Digital Storage Oscilloscope CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: